SettingFrequencies

Note: When set to the Heart/Love Charka Frequency, the VRCR does emit an audible 250.56 Hz tone that is the Modified Tesla Coil vibrating in high energy resonance. The reason this setting is the most audible is because the modified Tesla Coil is specifically designed to output its highest energy at that frequency. This setting is used by the Violet Ray Bulb in assistance to healing of physical pains and ailments. The sound the VRCR produces at this one setting may disturb some folk during meditation. If you find yourself to be extremely sensitive to sound, simply place the VRCR in an "out of the way" location where you cannot hear it as much or choose most any other setting that is non-audible. All settings are very effective.

Making frequency-setting changes for any function is easy.

The knob on the right is the (Mod) Modulation Adjust Knob.
The knob on the left is the Color Band Adjust Knob. Setting this knob to a particular color, for example Violet, then means you must also set the Mod Adjust Knob on the right to one of the matching Violet color dot settings to be a valid and calibrated frequency.

Example 1: Procedure for selecting the ‘Imagination Center.’

Note the color & number for the ‘Imagination’ setting given in the Calibration Chart for your machine. (Example: Violet – 5.0)
Set the left ‘Color Band Adjust knob’ to the Violet Dot.
On the right ‘Mod Adjust knob’, find the Violet Dot that is closest to the ‘5’ on the knob.
Align that Violet dot to the gold ‘Zero’ Marker Line (with the circle on it) printed on the front panel.

Note: If the number you were to dial in was Red-2.4, what you would see is that the Red dot closest to the ‘2’ on the knob should align with the ‘Zero’ Marker Line on the front panel while the hatch mark directly above the ‘2’ on the knob itself would line up with the fourth line from the left on the front panel. Thus, representing 2.4. Each fine mark on the front panel represents a (.1) increment.

Example 2: Procedure for setting to the Throat Chakra or Power Center.

Note the color & number for the ‘Throat or Power’ setting given in the Calibration Chart for your machine. (Example: Green-6.9)
Set the left Color Band Adjust knob to the Green Dot.
On the right Mod Adjust knob, find the Green Dot that is closest to the ‘6’ on the knob.
Align that Green Dot on the knob to the gold ‘Zero’ Marker Line on the front panel.

Note: What you will see is that the Green Dot closest to the ‘6’ on the knob aligns with the ‘Zero’ Marker Line while the hatch mark directly above the ‘6’ on the knob would line up with the ninth line from the left on the front panel. Thus, representing 6.9.

Once you become familiar with where the color dots are & what power center they represent, you don’t have to pay attention to the numbers. Just dial into the color dots.
If you see color dot markers on the right ‘Mod Adjust Knob’ that are very close to each other, simply carefully dial into the hatch mark directly above the desired dot marker.
Two side-by-side Half-dot markers under one Hatch Mark mean they have the same setting.